Product Description

Protect and display your HotSpring Highlife remote while monitoring your hot tub from the comfort of your home all in one elegant accessory! Leaving your remote on the spa’s built‑in charging dock subjects it to corrosive chemical vapors, intense humidity, and trapped heat under the cover - conditions that can corrode electrical connections, warp plastic housings, and lead to expensive premature failure of the remote. Our indoor charging stand removes the remote from that harsh environment, placing it in a safe, dry space where you can effortlessly check spa status from inside your home, showcase the sleek control panel as a stylish countertop piece, and keep it fully charged and protected. Crafted in durable PETG, it’s more than just a dock- it’s essential defense for your remote and a sophisticated accent to your spa setup.

? Key Features & Benefits

Full Kit Includes Anker 313 Qi Pad & 4 ft Micro-USB Cable
Plug-and-play wireless charging - just feed the USB cable through the bottom slot in the dock, connect to the charging pad, and slide into the dock for a snug friction fit. Note: USB power adapter (wall charger) not included; you must supply your own USB outlet.(Dock's Pad compatibility: any Qi charger up to 100 mm diameter × 10 mm thick can fit, however they may have a slightly loose fit, for best results we advise using the Anker 313 Qi charging Pad)
Sleek, Slightly Angled Cradle
Holds your Highlife remote with a gentle backward tilt so the screen is always visible and the charging coil stays flush for maximum power transfer with the charging pad.
Integrated Drip Pocket & Phone Slot
Designed to catch every drop from a wet remote, this subtly engineered well guards your countertop by corralling water into a discreet drainage pocket. (Wide enough to cradle many smartphones and sometimes double as a phone charger - just be sure the pocket is bone‑dry before attempting to charge your phone.)
Honeycomb-Inset Vent for Heat Dissipation
Strategically recessed hex pattern behind the charging pad allows airflow to keep your Qi pad cool while in use. A central round hole doubles as an easy finger “eject” port for the pad.
PETG Construction
Durable for indoor use - resists heat and chemicals. Avoid prolonged direct UV exposure (contact us if you require a weatherproof version for outdoor use)
Cable Management Channel
Rounded notch and standoffs route and secure the USB cable neatly out the back of the stand.
Elegant Cork Feet
Four discreet cork pads protect your countertop from scratches and add a refined touch.
Embossed “HIGHLIFE” Branding
Subtle etched logo on the front lip adds a premium touch

? Specifications

Overall Footprint: 4.8″ × 4.8″ × 4.5″ (123 × 123 × 115 mm)
Smartphone Slot (W × D): ~ 0.47″ × 3.35″(12 × 85)
Material: 3D-printed PETG, matte Charcoal Stardust finish
Cable: 4 ft Micro-USB (longer cable not included)

? Quick Setup

Feed the Micro-USB cable through the bottom channel.
Plug into the Anker Qi pad’s MicroUSB port.
Push the pad into the stand's pocket - it should slide in with a nice friction fit.
Place your Highlife remote (or optionally a smartphone) into the cradle to begin charging

⚠️ Important Notes

Compatibility: Designed specifically for HotSpring Highlife wireless remotes (2014 - 2023).
Radio Range: The remote uses RF signals - house construction and spa placement may affect indoor range. Experiment to find the best dock location if needed
Screen Behavior: Screen will dim after one minute of inactivity, then after five minutes the remote’s display will auto-sleep - this power-saving mode is normal and does not interrupt charging.